Herunterladen Diese Seite drucken

Auto-Vox 304-SL4A00002 Bedienungsanleitung Seite 9

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. The installation location of the backup camera
The installation location of the backup camera is flexible. Choose the optimum location depending on
the vehicle model. It is recommended to install on the rear upper part or roof of the vehicle.
2. Install the backup camera
① Install the antenna on the camera before installation.
② If you install the camera on the rear of the vehicle, please follow the steps below.
A. Use the electric drill or other professional equipment to install the camera bracket base on the vehicle with 4 screws.(As figure 1 shows)
B. Align the bottom of the camera with the slot at the top of the camera bracket base then push the camera down to engage the mounting
pins(As figure 2&3 shows).
C. Insert and tighten the anti-theft screw into the hole on top of the camera using the special screwdriver provided.(As figure 4 shows)
1
③ If you install the camera on the roof of the vehicle, please follow the steps below.
A. Remove the 4 screws which are holding the original mounting bracket to the camera.
(As figure 5 shows)
Note:
The screws need to be kept in a safe place to avoid losing them.
2
3
6
4
5

Werbung

loading

Verwandte Produkte für Auto-Vox 304-SL4A00002