Werbung
I NS T R U CTI ON S FOR USE
Hour hand
Second hand
Stopwatch second hand
Winding the watch (crown position 1)
The crown is screwed down (crown position 0). To loosen the crown, turn it
counter-clockwise (crown position 1). The movement is wound manually by
turning the crown clockwise. Under normal circumstances, a few turns of the
crown are enough to start the movement. We recommend 20 full turns of the
crown for the initial use. Simply wearing the watch every day should suffice to
keep the self-winding mechanism wound. The power reserve allows you to take
off your watch overnight without having to rewind it. About 40 turns of the crown
Minute hand
by hand will wind up the watch completely. Because the winding mechanism
of your watch is designed for automatic winding with minimal winding speed,
the watch should be wound at a moderate, consistent speed when winding by
hand to avoid damaging the movement.
Crown position
0
1
2
Time adjustment (crown position 2)
In crown position 2, the motion is paused. This helps you to set the watch
precisely. Please make sure the date changes at midnight and not at midday.
Just move the hands forward until the date changes. Afterwards you attempt to
set the time. We recommend moving the hands past the desired minute marker
Stopwatch minute hand
and then adjusting it backwards. The movement restarts as soon as the crown
is no longer in position 2.
Please take care to fasten the crown after making adjustments.
19
Werbung
