Tanita innerScan RD-545-HR Bedienungsanleitung Seite 9

Initial Setup (Type 1) Setup via Smartphone
5.Operate the body composition monitor as indicated by the app.
If the body composition monitor is not powered on, press and hold
button) for 3 seconds or more, then enter your information as indicated by the app.
Note:
・Depending on signal strength, it may take a few seconds to connect to the body
composition monitor.
・The
icon is lit while data is being transmitted.
・To weigh yourself while holding a smartphone,
first enter the amount of weight you want to
subtract into "Weight of Clothing, etc." The input
amount will be subtracted from your weight
display.
・If 0.20 kg is entered into "Weight of Clothing, etc.," the following will be
displayed before a measurement is taken.
6.When the body composition monitor is activated,
7.After is displayed, hold the control panel and carefully step barefoot onto the
measuring platform.
Note:
・Please refrain from moving during measurement.
・Measurements cannot be taken accurately if the control panel is held or resting on
the floor before
Registration of your body composition monitor is completed once measurement is completed.
is displayed.
is displayed.
(enter
Display before measurement
en
9