Taking Measurements - Tanita Innerscan Rd-545-Hr Bedienungsanleitung

en

Taking Measurements

Go to MY MEASUREMENTS and click 'START MEASUREMENT'.
Follow instructions in the app.
After is displayed, hold the control panel and carefully step
barefoot onto the measuring platform.
Note:
・Please refrain from moving during measurement.
・Measurements cannot be taken accurately if the control panel
is held or resting on the floor before
Stand still on the device until measurement is completed. Measurement data is
automatically sent to the smart phone and directly visible in the app.
Note:
・To weigh yourself while holding a smartphone, first enter the amount of weight
you want to subtract into "Weight of Clothing, etc." The input amount will be
subtracted from your weight display.
・If 0.20 kg is entered into "Weight of Clothing,
etc.," the following will be displayed before a
measurement is taken.
・Up to 2 kg can be entered for "Weight of Smartphone, etc."
・The amount entered in "Weight of Smartphone, etc." is subtracted from your
measured weight (0-200 kg)
If you do not have your smartphone when taking measurements.
Turn the power on by pressing the
the device.
Data from up to 10 measurements can be stored in this device.
Note:
Up to 10 measurements can be stored in the device per ID number.
Each new data entered after this amount causes the oldest data to be deleted.
12
is displayed.
Display before measurement
button while the control panel is stored in