Id Selection Mode; Measurement In Progress - Tanita Innerscan Rd-545-Hr Bedienungsanleitung

ID Selection Mode

If the auto-recognition function discovers multiple possible candidates, the device
automatically switches to ID selection mode after body composition measurement.
(The device beeps)
Select your ID number using the
If you notice that your ID number is incorrect while you are viewing your results,
press for 3 seconds or more to switch to the ID selection mode and re-select
your ID.
Note:
・If you turn off the power without re-selecting your ID number, those measurement results are saved to the incorrect ID number.
・The backlight color changes depending on the registered ID.
1.Blue 2.Pink

Measurement In Progress

The mobitor and the control panel light up depending on the area being measured.
This is a useful indication of the progress of the current measurement.
and buttons, then press
3.White 4.Sky Blue
to confirm.
Guest: Purple
en
Ex: Measuring the right side of the body
17