Toro Revolution 60 V Bedienungsanleitung Seite 6

use the tool while ill, tired, or under the influence
of alcohol or drugs.
13. Ensure that the ventilation openings are kept
clear of debris.
14. Under abusive conditions, the battery pack may
eject liquid; avoid contact. If you accidently
come into contact with the liquid, flush with
water. If the liquid contacts your eyes, seek
medical help. Liquid ejected from the battery
pack may cause irritation or burns.
15. Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
16. CAUTION—A mistreated battery pack may
present a risk of fire, explosion, or chemical
burn.
•
Do not disassemble the battery pack.
•
Replace the battery pack with a genuine
Toro battery pack only; using another type of
battery pack may cause a fire or risk of injury.
•
Keep battery packs out of the reach of
children and in the original packaging until
you are ready to use them.
IV. Maintenance and Storage
1. Maintain the tool with care—Keep it clean and
in good repair for best performance and to
reduce the risk of injury. Follow the instructions
for lubricating and changing accessories. Keep
handles dry, clean, and free from oil and grease.
2. When the battery pack is not in use, keep it
away from metal objects such as paper clips,
coins, keys, nails, and screws that can make a
connection from 1 terminal to another. Shorting
the battery terminals may cause burns or a fire.
3. Keep your hands and feet away from moving
parts.
4. Shut off the tool, remove the battery pack from
the tool, and wait for all movement to stop before
adjusting, servicing, cleaning, or storing the tool.
5. Check the tool for damaged parts—If there
are damaged guards or other parts, determine
whether it will operate properly. Check for
misaligned and binding moving parts, broken
parts, mounting, and any other condition that
may affect its operation. Unless indicated in the
instructions, have an Authorized Service Dealer
repair or replace a damaged guard or part.
6. Do not replace the existing non-metallic cutting
means on the tool with a metallic cutting means.
7. Do not attempt to service or repair the tool,
battery pack, or battery charger except as
indicated in the instructions. Have an Authorized
Service Dealer perform service using identical
replacement parts to ensure that the product is
safely maintained.
8. Store an idle tool indoors in a place that is dry,
secure, and out of the reach of children.
SAVE THESE
INSTRUCTIONS
4