SCOPREGA GE 1800 EL Bedienungsanleitung Seite 9

I N S T R U C T I O N S
7. WARNING! RISK OF EXPLOSION.
Inflate the inflatable unit only complying with the manufacturer's recommendations. Exceeding the
pressure rating could cause the inflator to explode, resulting in personal injury.
8. NEVER LEAVE THE DEVICE UNATTENDED.
Overinflation could result in serious injury and property damage.
9. WARNING! RISK OF UNSAFE OPERATION.
Do not modify or attempt to repair the unit. Do not drill into or make any modifications to the inflator
or its accessories. Any modification to the product will void its warranty.
10. NEVER CARRY THE INFLATOR BY THE FLEXIBLE HOSE OR POWER CABLE.
11. DO NOT OBSTRUCT THE SUCTION PORT
4. INTRODUCTION
The GE 1800 EL is a device capable of inflating inflatable structures to a maximum pressure of 360
mbar. The inflator is equipped with thermal protection that interrupts inflating operations in the
event of motor overheating. Normal operation will continue automatically after a break of 20/40
minutes.The inflator is supplied without hoses or fittings. HOSES AND FITTINGS SUITABLE FOR THIS
INFLATOR FOR CONNECTION TO THE MOST COMMON INFLATOR VALVES CAN BE PURCHASED
FROM AUTHORISED SCOPREGA CENTRES.
5. DATI TECNICI
1. Power supply
2. MAX. power
3. MAX. pressure
4. MAX. flow rate
5. Dimensions
6. Weight
7. Operating temperature range
8. Protection degree
6. HOW TO USE
1. Connect the inflation hose to the inflation nozzle (Point 2 Fig.1) of the GE 1800 EL and the main
valve of the inflatable structure.
2. Connect the power cord to the socket. (Point 4 Fig.1).
3. Press the main switch of the inflator to start inflation (Point 1 Fig.1).
CORRECTLY CONNECT THE HOSE TO THE INFLATOR AND THE
INFLATABLE, ENSURING THAT THERE ARE NO LEAKS. CHOOSE
THE APPROPRIATE GASKET FROM THOSE SUPPLIED.
210-240 Vac; 50 Hz
1800 W
360 mbar (5.2 psi)
3400 l/min - 2700 l/m (0,1 bar)
330 x280 x h 350 mm
6,4 kg
-10/40°C
IP 66
9