Chicago Pneumatic CP 0122 S Sicherheits- Und Betriebsanleitung Seite 12

Safety and operating instructions
Overview
To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.
Design and function
The CP 0122 S, CP 0122 SL and CP 0125 S are
machines fitted with a muffler, designed for light
demolition and construction work. The machines
can be used both horizontally and vertically. No
other use is permitted.
Recommended insertion tools are listed in the spare
parts list.
Choosing the correct
pneumatic hammer for a
task
It is important to choose the correct size of
pneumatic hammer for the work to be performed.
A pneumatic hammer that is too small means that
the work will take longer.
A hammer that is too big means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of
pneumatic hammer is that a normal sized piece of
broken material should be removed from the
workpiece within 5–10 seconds operation.
> If it takes less than 5 seconds a smaller pneumatic
hammer should be selected.
> If it takes more than 10 seconds a larger
pneumatic hammer should be selected.
12
CP 0122 S, CP 0122 SL, CP 0125 S
Main parts
A
D
B
E
F
C
CP 0122 S, CP 0125 S
A
B
C
CP 0122 SL
A. Handle
B. Trigger
Tool retainer
C.
Air inlet
D.
Muffler
E.
F. Cylinder
9800 0832 90e | Original instructions
D
E
F