Veripart VPTMKV48W Benutzerinformation Seite 46

3.1 REVERSE THE DIRECTION IN WHICH THE DOOR OPENS
To remove the door, the appliance must be tilted backwards. We recommend
doing this with two people. Rest the appliance on a firm surface so that it
does not slip away as you reverse the door.
Keep all removed parts to remount the door later.
Do not lay the appliance down flat. This can damage the cooling system.
If the appliance does have to be placed on its back or side for some time
during this process, it must be able to stand upright for four hours before
connecting it to prevent damage to the internal components.
Necessary tools:
• Crosshead screwdriver
• Flat head screwdriver
List of tools to be provided by the user
Cross screwdriver
Putty knife thin-blade
screwdriver
5/16 " socket spanner
!
ATTENTION!
Masking tape
Parts to be used for door reverse
Upper hinge
SN parts Quantity Notes
1 Upper hinge 1
The freezer door direction cannot be changed and must remain in place.
2 Hinge cover 1
Tapping
3 4
locking screw Pre-installed on the
4 Hole cap 1 refrigerator, still used
when door is reversed
5 Pin 2
Lower hinge
6 1
assembly
7 Leveling foot 1
Power o the refrigerator, and
remove all objects from the door
trays.
Dismantle the hinge cover, screws
and upper hinge, and remove the
hole cap and pins from the other
side.
Upper hinge
Hinge cover
pper hinge
Upper hinge
Hinge cover
Install the door on the lower hinge
upper hinge, hinge cover, pins and
Hinge cover
Hinge
cover
Top hinge
• Adjustable spanner
• Masking tape
Install the door on the lower hinge
upper hinge, hinge cover, pins and
Leveling foot
Hinge cover
1. Unplug and empty the appliance.
assembly, and then install the
hole cap in sequence.
Leveling foot
2. Remove the hinge cover, screws
and top hinge, and remove the
cap and pins on the other side.
45
assembly, and then install the
hole cap in sequence.