Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Installation of the appliance
• This appliance is not intended for use as a
built-in refrigerator.
• Use the front adjusting legs to level the
appliance. If the appliance is not level, it may
affect the performance of the gasket seal or
even lead to a failure of your appliance.
• It must be possible to disconnect the
appliance from the mains power supply. The
plug must therefore be easily accessible after
installation.
• Place the appliance on a firm and flat surface
(floor) so that it is stable, otherwise vibrations
and noise may occur. When placing the
refrigerator on floor coverings such as
carpets, straw mats or polyvinyl chloride
(PVC), place a solid sheet or cover under the
appliance to prevent colour change due to
heat dissipation.
• Before plugging in the power cable, check
that the voltage and frequency of the type
plate match your power supply network.
The appliance must be earthed. The power
cable is supplied with a contact for this
purpose. If the socket is not earthed, connect
the appliance to a separate earth according
to current regulations and consult a qualified
electrician.
43
Werbung
