AEG IPE84571IB Benutzerinformation Seite 83

Correct cookware position:
Incorrect cookware position:
6.3 FlexiBridge Big Bridge mode
To activate the mode touch
the correct mode indicator
connects three rear sections into one cooking
zone. The front section is not connected and
operates as a separate cooking zone. You
can set the heat setting for each zone
separately. Use two left side control bars.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected sections. If
you use cookware smaller than two sections
the control bar blinks and after 2 minutes the
zone switches off.
until you see
. This mode
Incorrect cookware position:
6.4 FlexiBridge Max Bridge mode
To activate the mode touch
the correct mode indicator
connects all sections into one cooking zone.
To set the heat setting use any of the two
control bars on the left side.
Correct cookware position:
To use this mode you have to place the
cookware on the four connected sections. If
you use cookware smaller than three sections
the control bar blinks and after 2 minutes the
zone switches off.
until you see
. This mode
ENGLISH 83