AEG IPE84571IB Benutzerinformation Seite 80

Touch until signal sounds and the
indicator comes on to activate the function.
The control bars disappear. Deactivate the
hob.
When you deactivate the hob, the
function is still active.
To deactivate the function for only one
cooking time: Activate the hob with
comes on. Touch
the indicator comes off. The control bar
appears. Set the heat setting within 50
seconds.You can operate the hob. When you
deactivate the hob with
active.
To deactivate the function permanently:
Activate the hob and do not set the heat
setting. Touch until signal sounds and the
indicator comes off. The control bars appear.
Deactivate the hob.
5.10 OffSound Control (Deactivating
and activating the sounds)
Deactivate the hob first.
1. Touch for 3 seconds to activate the
function.
The display comes on and goes out.
2. Touch for 3 seconds.
or comes on.
3. Touch of the timer to choose one of
the following:
• - the sounds are off
• - the sounds are on
4. Wait until the hob deactivates
automatically to confirm your selection.
When the function is set to
the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.
5.11 Power management
If multiple zones are active and the
consumed power exceeds the limitation of the
80 ENGLISH
.
until signal sounds and
the function is still
you can hear
power supply, this function divides the
available power between all cooking zones.
The hob controls heat settings to protect the
fuses of the house installation.
• Cooking zones are grouped according to
the location and number of the phases in
the hob. Each phase has a maximum
electricity loading of 3680 W. If the hob
reaches the limit of maximum available
power within one phase, the power of the
cooking zones will be automatically
reduced.
• For cooking zones that have a reduced
power, the control panel shows the
maximum possible heat settings.
• If a higher heat setting is not available
reduce it for the other cooking zones first.
• The activation of the function depends on
the number and size of pots.
Refer to the illustration for possible
combinations in which power can be
distributed among the cooking zones.
5.12 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on the basis of the mode setting
and temperature of the hottest cookware on
the hob. You can also operate the fan from
the hob manually.
For most of the hoods, the remote
system is originally deactivated. Activate
it before you use the function. For more
information refer to the hood user
manual.