Siemens CT918L1D0 Gebrauchsanleitung Seite 63

Notes
The display indicates the progress
¡
of the descaling or cleaning pro-
cess.
If your appliance has been locked,
¡
you can only operate it again once
the descaling process has been
carried out.
Overview of service programmes
You can find an overview of the service programmes here.
Note: The start image shows the remaining number of beverages that can be
dispensed until running the programme and the duration.
INTENZA filter
Cleaning milk system
calc'nClean
Cleaning
Descaling
Cleaning brewing unit The display shows optimum cleaning
Cleaning beverage
system
Frost protection
Cleaning and servicing en
Tip: In addition to the automatic rins-
ing process, regularly also remove
and clean the brewing unit.
Using the service programmes
Press "Care & maintenance".
1.
Press the symbol for the required
2.
programme.
The display will guide you through
a
the programme.
Insert, replace or remove the water fil-
ter.
Rinse the milk system automatically.
Combine cleaning and descaling. Re-
move residues of limescale and cof-
fee from the pipes.
Remove residues of coffee from the
pipes.
Remove residues of limescale from
the pipes.
of the brewing unit step by step.
The display shows optimum manual
cleaning of the beverage dispenser
and milk system step by step.
Drain the pipes to protect the appli-
ance during transport or storage.
63