Cameo CLPSTMINI3WTRI Bedienungsanleitung Seite 11

MODE SELECTION:
SOUND ACTIVE MODE
Press the mode button to select sound mode. The unit will then run
via the sound. Press the up and down buttons to adjust the sound
sensitivity levels.
RGB
00 - 99 sound sensitivity adjustable.
7 COLOUR
00 - 99 sound sensitivity adjustable.
SLAVE MODE
Press the MODE button to enter SLAVE MODE.
Link the slave unit and the master unit via DMX cable. The slave unit
will follow in sequence with the master unit.
DMX ADDRESS SETTING MODE
Press the MODE button to enter DMX ADDRESS SETTING MODE.
Press ENTER to access edit mode (the last 3 figures will blink). Use the
UP and DOWN buttons to set the DMX address (A001 - A512).
Press ENTER to confirm
11