Christopeit Sport WRT2000 Montage- Und Bedienungsanleitung Seite 16

COMPUTER
Turn
The supplied computer offers the greatest training comfort.
All determined values are displayed alternately (scan) or
individually in the two-line display. All values count up from
zero. The computer switches on with a short press or simply by
starting a workout. The computer begins to record all values
and display them alternately. To stop the computer, simply end
the workout. The computer stops all measurements and saves
the achieved values (except speed, time per 500m and rowing
strokes per minute) for 3 minutes. If you resume training within
these 3 minutes, you can continue training from these values. The
computer switches off automatically about 3 minutes after
the end of the training session, in stand-by mode. All values
reached up to that point will be deleted.
HAW TO USE
Pressing the display turns the display on. Each additional press
changes from one function to the next. By turning the outer ring
on the computer you can increase or decrease the resistance
level. (16 levels)
HEART RATE MEASUREMENT FUNCTION
Optionally, you can use a compatible bluetooth heart rate
belt to measure your heart rate (Christopeit-Sport heart
rate bet 2209). The measured pulse value is shown
alternately by a heart symbol and pulse value in the upper
display. Response time is up to 60 seconds.
Attention! The heart rate measurement is not suitable for
medical purposes.
The product can be used with the Kinomap app. This enables ent-
ertaining and interactive training with Android or IOS devices and
saving training data.
Sport, coaching, gaming and eSport are the keywords of the Ki-
nomap app. This contains many kilometers of real film materi-
al to exercise inside as if you were outside; Tracking routes and
analysis of your performance; Coaching content; Multiplayer
mode; new posts daily; Official indoor races and more ... The APP
thus contains approx. 100,000 videos recorded by athletes and
200,000 km of accumulated tracks for cycling, running or rowing
for currently approx. 270,000 members from all over the world.
Download the app and connect
Scan the adjacent QR code with your smartphone / tablet or use
the search function at the Playstore (Android) or APP Store (IOS)
to download the Kinomap APP. Register and follow the instruc-
tions in the APP. Activate Bluetooth on the smartphone or tablet
and select the device manager via the menu in the APP and then
select the „Rowing machine" category. Then select your type de-
signation via the manufacturer logo „Christopeit Sport" in order to
connect the sports equipment. Depending on the sports equip-
ment, different functions are recorded by the APP via Bluetooth or
data is exchanged.
Press
UPPER DISPLAY
Change all displayed values in the upper display
automatically.
Level: Shows the set resistance level.
Tempo: Shows your tempo in strokes per minute (spm).
Bpm: Shows
compatible pulse belt is on.
LOWER DISPLAY
Change
automatically when the scan function is activated or
display a selected function permanently.
Scan: This symbol lights up when the values are
displayed alternately
Speed: This symbol lights up when the display shows
the speed in km/h.
Time: This symbol lights up when the display shows the
training time in minutes.
Distance: This symbol lights up when the display shows
the distance in kilometers.
Calories: This symbol lights up when the display shows
the approx. consumed calories in Kcal.
Split: Shows the strokes.
Time /500m: Shows the time in minutes for 500m.
The computer indicates the connection with a Bluetooth symbol.
Attention! The Kinomap APP offers a free trial version for
14 days. After that, fees will apply which are listed on the Ki-
nomap homepage. Further information can be found at:
https://www.kinomap.com/en/
16
the current heart rate value when
all displayed values
GB
in the lower display
IOS AND ANDROID APP