Graph - MACHEREY-NAGEL Nanocolor Bedienungsanleitung

Setup
This option allows the user access to various program pa-
rameters and to make adjustments.
Connection
COM (serial interface) Setup, settings ex-works:
Interface:
Baud rate:
Data bits:
Stop bits:
Parity:
Flow control:
Language
Select the preferred language. Changes are immediately
accepted.
Configuration
User
The name, address and user name entered here, ap-
pear later on reports and certificates.
Connection
The automatic search for an equipment can be
switched ON or OFF.
Help
Help for various functions of the T-Set and the T-Set soft-
ware

3.4 Graph

This function is used to record, display and save heating
curves. The operating panel on the heating block is also
displayed on the screen (temperature, time and keyboard).
The heating program required can be selected via the
NANOCOLOR
or directly at the heating block via the symbol keys. Start
the heating program with the corresponding W-key. The
on-going temperature curve is displayed on the screen
and can be saved at any required instant of time by pres-
sing the „Save" button. The heating curve is automatically
16
COM 1
2400
8
1
None
None
T-Set software with the symbol key icons
®