Elektror S-MP-Serie Betriebs- Und Montageanleitung Seite 24

https://elektror.ru
8 DECLARATION OF INSTALLATION CONFORMITY PURSUANT TO ANNEX II 1 B
DECLARATION OF CONFORMITY IN ACC. WITH EVPG (ENERGY CONSUMPTION
EN
RELEVANT PRODUCTS ACT).SECTION 4 PARAGRAPH 1
As manufacturer,
Elektror airsystems gmbh
Hellmuth-Hirth-Strasse 2
D-73760 Ostfi ldern
herewith declares that the product, to which this declaration relates, complies with the following essential requirements
of the Machinery Directive (2006/42/EC).
Description of the partially completed machine:
ATEX Stainless steel medium pressure blower S-MP 345/20, S-MP 345/30, S-MP 375/27, S-MP 425/24, S-MP 425/31,
with the following designation for gas:
with the following designation for dust:
with the following designation for gas
and dust:
The serial number and year of manufacture can be found on the rating place and the corresponding delivery note.
Description of the essential requirements of the directives, with which the partially completed machine complies:
Machinery Directive (2006/42/EC), Annex I, Articles 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.5.1, 1.6.1, 1.7.1, 1.7.3
Electromagnetic Compatibility Directive (2014/30/EU)
Directive on equipment and protective systems intended for use in potentially explosive atmospheres (2014/34/EC)
The partially completed machine described here continues to fulfi l the protective regulations of the Low Voltage Directive
(2014/35/EC) according to Annex I No. 1.5.1 of the Machinery Directive.
The commissioning of the partially completed machine is not permitted until it has been verifi ed that the machine in which the partially
completed machine is to be installed, complies with the provisions of the Machinery Directive (2006/42/EC).
The following harmonised standards have been applied:
DIN EN ISO 12100
ISO 14694
DIN EN 1127-1
DIN EN ISO 80079-36
DIN EN ISO 80079-37
DIN EN 14986
DIN EN 60079-0
DIN EN 60079-1
DIN EN 60079-7
As manufacturer, Elektror airsystems undertakes to forward the special technical documentation in respect of the partially completed
machine to national authorities at their request. The special technical documentation in respect of this partially completed machine
according to Appendix VII Part B has been created and is lodged with the "notifi ed body" EU No. 0637.
Person responsible for the documentation: Mr. Steff en Gagg, Tel. +49 711 31973-2124.
Kreher (Managing Director)
Ostfi ldern, 29.06.2020
24
АО "БЕРГАБ" Тел./факс: (495)727-22-72 catalog@elektror.ru
S-MP 450/35, S-MP 450/46, S-MP 540/60, S-MP 600/54
II 3G Ex h IIB T4 Gc /
II 3G Ex h IIC T4 Gc /
II 2G Ex h IIC T4 Gb
II 3D Ex h IIIC T125°C Dc /
II 2G Ex h IIB T4 Gb
II 3D Ex h IIIC T135°C Dc
2011 Safety of machinery - General principles for design - Risk assessment and risk reduction
2003 Industrial fans - Specifi cations for balance quality and vibration levels
2019 Explosive atmospheres - Explosion prevention and protection -
Part 1: Basic concepts and methodology
2016 Explosive atmospheres
Part 36: Non-electrical equipment for use in potentially explosive atmospheres -
Basic concepts and requirements
2016 Explosive atmospheres
Part 37: Non-electrical equipment for use in potentially explosive atmospheres -
Protection by constructional safety "c"
2017 Design of fans working in potentially explosive atmospheres
2014 Electrical apparatus for potentially explosive atmospheres
Part 0: Equipment - General requirements
2015 Electrical apparatus for potentially explosive atmospheres
Part 1: Equipment protection by fl ame-proof enclosures 'd'
2016 Explosive atmospheres
Part 7: Equipment protection by increased safety "e"
Operating and assembly instructions S-MP ATEX
II 3G Ex h IIB T3 Gc /
II 2G Ex h IIB T3 Gb /
II 3D Ex h IIIC T135°C Dc
II 2G Ex h IIB T4 Gb
/
II 3D Ex h IIIC T135°C Dc
II 3G Ex h IIC T3 Gc
II 2G Ex h IIB T4 Gb
www.elektror.com