Maintenance And Care Of The Model; Cleaning - roco 73036 Handbuch

So that your crane continues to provide you with enjoyment, a certain amount of service work
is expedient.
▪
Cleaning of the notches for end position shutdown
Should the crane no longer stop in end position (F2 + F20), then the notches for end posi-
tion shutdown must be cleaned. Please carefully remove any dirt using a little brush in the
marked areas.
Observe the alignment of the chassis to the superstructure during assembly. The driver's cab
must be mounted above the motorised bogie (front).
front
Bogie with traction tyres
46
46
73036.indd 46 73036.indd 46

Maintenance and care of the model

2.
Notches for end posi-
tion shutdown
1.
21.06.2021 09:24:42 21.06.2021 09:24:42