Zipper Maschinen ZI-WP400TN Betriebsanleitung Seite 34

ZIPPER MASCHINEN GmbH
ZI-WP400TN
www.Zipper-Maschinen.at
11. Assembly top guard
Install the top guard with four M5×10 screws and
lock nuts as shown in Fig. K.
12. Assembly log carriage extension
Loosen the M5×20 wing screw on the rear side of
the log carriage until the log carriage extension
can be inserted into the opening. Slide the log
carriage extension into the channel and align it
correctly. Then fix it with the wing screw.
ASSEMBLY
34