Transport; Checking Scope Of Delivery; The Workplace - Zipper Maschinen ZI-WP400TN Betriebsanleitung

13 TRANSPORT

For proper transport, follow the instructions and information on the transport packaging regarding
centre of gravity, attachment points, weight, means of transport to be used and prescribed
transport position, etc.
Transport the machine in its packaging to the place of installation. When lifting, carrying and
depositing the load, make sure that you are in the correct posture:
• Lifting, Depositing
Ensure stability when lifting / setting down (legs hip width).
Lift / lower load with bent knees and straight back (like weightlifter).
Do not lift / lower the load jerkily.
• Carrying
Carry load with both hands as close to body as possible.
Carry load with straight back.
14 ASSEMBLY

14.1 Checking scope of delivery

Check the machine immediately after delivery for transport damage and missing parts.

14.2 The workplace

Choose a suitable place for the machine. Pay attention to the safety requirements and the
dimensions of the machine. The selected location must ensure a suitable connection to the
electrical supply. Make sure that the machine is placed on a solid and level surface and that the
ground can support the load of the machine. The machine must be levelled at all support points. It
is also necessary to guarantee a distance of at least 0.8 m around the machine. The necessary
distance for the feeding of long workpieces must be provided.
ZIPPER MASCHINEN GmbH
ZI-WP400TN
www.Zipper-Maschinen.at
Anchoring on level ground
Use four bolts to secure your machine to the ground.
Due to the different ground conditions, these are not
included in the delivery content. Select the correct
bolt type for your soil conditions.
TRANSPORT
28