Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E
N
Introduction
There are many choices out there for pure trainers, but for those
who want something that serves as a trainer but won't become
obsolete after they've learnt to fly- look no further than the new
1280mm Easy Trainer V2!
As a trainer and a glider, the FMS 1280mm Easy Trainer V2 is a
plane most pilots can appreciate!
The upgraded 2212-2650KV motor gives fantastic thrust to
weight ratio while being very efficient in flight. Expect 6-7
minutes of full-power flight time and up to 20 minutes with
proper throttle management!
Thanks to the pusher configuration, the 1280mm Easy Trainer
V2 can teach the pilot basic aerobatics with an added safety
factor; it's also a great FPV platform as there is no propeller
obstructing the view ahead!
Assembled in as little as 5 minutes- the robust airframe is easy
to build, repair and will stand up to rough handling with ease.
Can't choose between a glider or a trainer? Why not have both
with the FMS 1280mm Easy Trainer V2?
Kit contents
Before assembly, please inspect the contents of the kit. The
photo below details the contents of the kit with labels. If any
parts are missing or defective, please identify the name or
part number (refer to the spare parts list near the end of the
manual) then contact your local shop or email us: support
@fmsmodel.com.
Specifications
Wingspan: 1280mm (50.4in)
Overall Length: 910mm (35.8in)
Flying Weight: Around 630g
Motor Size: 2212 - KV2650
Wing Load: 29.4g/dm² (0.06oz/in²)
Wing Area: 21.4dm² (331.5sq.in)
ESC: 20A
Servo: 9g x 4pcs
Recommended Battery: 7.4V 1300mAh 20C
Features:
• Simple, lightweight and robust
• Dual purpose glider/trainer
• Pusher configuration for added safety, great FPV platform
• Vibrant red trim scheme
• Belly lander configuration
• Functional ailerons
Table of contents
..............................................................
..............................................................
Kit contents
........................................................
.....................................................
......................................................
......................................................
............................................................
.......................................................
A
C
A:
Fuselage
C:
Main wing halves
B:
Wing spar
D:
Horizontal stabilizer
3
.........................................
..............................
.................................................
...............................................
...............................................
....................
B
D
E
E: Wing alignment
pins
3
3
4
6
6
6
8
8
8
9
9
10
10
11
Werbung
Inhaltsverzeichnis
