Flyer PINION E-DRIVE SYSTEM Benutzerhandbuch Seite 68

CALIBRATION
The MGU takes care of adjusting the gear shift itself. Fine
adjustment of the MGU is not necessary. Should calibration
nevertheless be necessary, the MGU recognises this itself and
carries out a calibration. The calibration of the MGU can be
started manually, on the display of the e-bike, for service
purposes if required (e.g. after changing the oil in the Pinion
gearbox or installing a crank).
IMPORTANT
Do not load or turn the cranks during calibration! Otherwise,
the calibration is cancelled.
68