Flyer PINION E-DRIVE SYSTEM Benutzerhandbuch Seite 64

SETTINGS
The settings menu is the last view that can be accessed by
pressing the selection rocker to the right. It can only be called
up when the e-bike is stationary.
Use the plus/minus button for vertical navigation and confirm
your selection with the OK key. Press the back button to return
to the previous menu.
Here are the most important setting menus for the MGU:
● Gear > Smart.Shift
In this menu START.SELECT and PRE.SELECT can be
(de)activated as well as the corresponding gear you want
to start in and the cadence you like to ride at can be
changed.
● Gear > Gear trigger assignment (standard/inverse)
● Gear > Calibration (after reassembly of the crank or after
prompt in the display)
● My Bike > Pushing aid speed
● About > Motor (serial number)
APP AND FIT KEY CARD
The FIT KEY CARD is the identity card of the e-bike and
connects it to the FIT CONTROL app. You can make settings
directly and access many functions:
● Navigation with map
● Route planning with Komoot
● Find my e-Bike
● Theft protection with FIT Digital Key (for a fee)
● Drive screen (for a fee)
● Connection with heart rate monitor
● E-Bike passport – your e-bike at a glance
● Fine tuning motor and battery
64