urmet domus 1716/2 Bedienungsanleitung Seite 9

AUDIO / VIDEO SETTINGS DURING CALL
When a call is received or during communication, some audio/video adjustments can be performed: by
pressing the button MENU, the following screen appears
This menu will be displayed over the image coming from the door unit
• Select (Loudspeaker volume), (Brightness),
Up/Down.
• Select the desired value using directional buttons Right/Left
• Press (OK) to confi rm; press (X) to cancel or press MENU to quit the setting menu.
FLOOR CALL
The video door phone is equipped with a pair of terminal pins (CP) for the connection of a fl oor call button.
When a fl oor call is received, the video door phone emits a ring, according to the ring tone selected by the
user; the display does not turn on. If the user has several apartment stations in parallel, connect this button
to only one apartment station. The internal codes will ring in sequence.
AUTO-ON
The auto-on function allows to see on the display the image captured by system call modules. When the
system is in standby mode, press the button
phone (the fi rst displayed image is the one coming from the main call module number 0); press again the
button to go to the next call modules. The fi rst images displayed are those coming from the main call
modules, then secondary of the belonging column.
By activating the audio with the button
selected call station; by pressing again the button
The auto-on function can not be performed if the column is already in conversation. If the auto-on function
is activated when the column is already in conversation, the video door phone will emit an alert tone.
CALLING THE SWITCHBOARD
This function allows to establish a communication with the concierge switchboard: press the button
send the call to the switchboard. If there is no answer within 10s, the video door phone button
off and the call will be stored in the switchboard.
§
The call to the switchboard is only AUDIO.
INTERCOM CALL
Intercom call using the directory
The device allows to perform up to 32 intercom calls.
There are two types of intercom calls: intercom call inside the same apartment and intercom call outside the
16
(Contrast), (Colour) using directional buttons
and wait until the image is displayed on the video door
, an audio and video communication is established with the
, the auto-on function is ended.
apartment (the called device must be in the same column). To perform a call from the directory:
• Press the button MENU to access the menu.
• Select the icon
• Select the user to be called with directional buttons and press OK.
• When the call is sent, the monitor turns off.
§
If the system is busy, the user can not access the menu.
Intercom call using quick selection keys
The fi rst 8 users of the video door phone directory can be called using quick selection keys; the fi rst 8 users
are associated to the buttons as follows:
User 1 -
User 2 -
User 3 -
User 4 -
User 5 -
User 6 -
User 7 -
User 8 -
To make an intercom call using the fast dial keys, press the push-to-talk button
keys indicated above. Press again the push-to-talk button to close the conversation.
If the system is busy, the video door phone emits an alert tone.
§
The intercom call is only AUDIO.
FUNCTIONING WITH HEARING AID
The video door phone is fi tted with a device that allows hearing-impaired persons wearing a hearing aid to
hear the person speaking from the call station or from another video door phone in the case of intercom
calls. The device is able to interface hearing aids with "T" function at a distance of around 20 cm.
to
will turn
DS1716-001B DS1716-001B
and press OK.
max 20cm
followed by one of the
Set the selector
to T mode
17