urmet domus 1716/2 Bedienungsanleitung Seite 7

ENGLISH
Aiko video door phones Ref. 1716/1 and Ref. 1716/2 are designed to be used in 2Voice systems.
COMPONENTS DESCRIPTION AND CHARACTERISTICS
1 2
15
14
13 12 11 10 9
1 -
Display
2 - Microphone
3 -
Indication of "mute function" active (green led)
4 - Indication of automatic door lock release active (green led)
5 - Indication of present messages (green led)
6 - Indication of open door or absence active (red led)
7 - Door lock release button - Contextual button OK
8 -
Navigation buttons
9 - Open main entrance button
10 - Mute ringer button (MUTE)
11 - Switchboard call button
12 - Automatic activation button
13 - Menu button
14 - Loudspeaker
15 -
Button used to activate/deactivate audio - Contextual button X
16 - Terminal pins for connection to the system
17 - Line termination
18 - Confi guration dip switch:
- 2 to defi ne the number of the apartment station inside the apartment
- 8 to defi ne the number of the apartment in the column
§
Aiko video door phone is provided with an embedded device for hard of hearing.
12
3
4
5
6
7
8
INSTALLATION
Fix the fl ush mounting box at the height shown in the following fi gure.
Fasten the bracket to the embedding box.
Perform connections and dip-switch settings.
At the end of programming, fasten the video door phone to the bracket.
16
17
18
TERMINAL PINS DESCRIPTION
LINE IN
Connection to the system BUS
LINE OUT Connection to the next device for an in/out connection
S+
Call repeat
S- Call repeat
CP Floor call
CONFIGURATION OF APARTMENT STATIONS BRACKETS
Default values: all video door phones default confi guration is the following:
USER = 127
INTERNAL CODE = 0
Therefore, for the proper operation of the system, always pay attention to dip switches, in order to
confi gure them with the correct value.
§
For dip switch settings, see the system manual provided with the power supply Ref. 1083/20.
DS1716-001B DS1716-001B
1
2
O N
=
INT CODE
O N
=
13