Stiga E320 Gebrauchsanweisung Seite 60

The inside of the chassis
is dirty
4. Mowing is difficult
The cutting means is not in
good condition
5. The machine starts to vibrate abnormally
Damaged or loose parts
6. The motor shuts down whilst working
The thermal protection has
tripped due to overheating
of the motor.
For any doubts or problems, please do not hesitate to con-
tact your nearest Customer Service Centre or Your Dealer.
Clean the inside of the
chassis to ease the grass
discharge towards the
grass catcher
Have the cutting means
sharpened or replace it
Stop the machine and
disconnect the plug from
the socket.
Inspect for damage
Check for and tighten any
loose parts
Have all checks, repair
work and replacements
carried out by a specialized
Centre only.
Stop the machine and
disconnect the plug from
the socket. Always make
sure the air intakes are free
of debris.
6