Herunterladen Inhalt Inhalt Diese Seite drucken

HQ Power VDP250SC8M2 Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

• Control LEDs
Red
Power ON
Yellow
DMX out (sound/auto mode)
Green
DMX in
e. Stand-Alone Mode
In stand-alone mode, your VDP250SC8M2 can be used without controller. The scanner is equipped with a built-in
microphone which allows a sound-controlled operation. Select the "Master mode" to use this function.
f. Master/Slave Mode
This operation mode allows all slave devices to operate synchronously with the master device. Connect the DMX out
of one device to the DMX in of the next using a cable with XLR jacks. Set the master device to "No DMX sound" or
"No DMX auto". Set the address of all slave devices to 1.
g. DMX Mode
All DMX-controlled devices need a digital start address so that the correct device responds to the signals. This start
address is the channel number from which the device starts to "listen" to the DMX controller. Enter the correct
number and read it from the display located on the base of the VDP250SC8M2.
You can use the same starting address for a whole group of devices or enter an individual one for every device.
When all devices have the same address, all the VDP250SC8M2s will "listen" to the control signal on one particular
channel. In other words: changing the settings of one channel will affect all devices simultaneously. If you set
different addresses, each device will "listen" to a separate channel number. Changing the settings of one channel will
only affect the device in question.
In the case of the 8-channel VDP250SC8M2, you will have to set the start address of the first VDP250SC8M2 to 1,
the second VDP250SC8M2 to 9 (1 + 8), the third to 17 (9 + 8) and so on.
h. Detailed DMX Values per Channel
Channel
Function
1
Shutter, strobe
2
Colour wheel
3
Rotating gobo wheel
VDP250SC8M2_v2
From
To
Description
0
128
Gradual dimmer adjustment from 0 to 100%
129
133
No function (shutter open)
134
243
Random strobe effect with decreasing speed
244
249
Shutter closed
250
255
Shutter open
0
15
White
16
31
Magenta
32
47
Yellow
45
63
Orange
64
79
Green
80
95
Red
96
111
Blue
112
127
Violet
128
191
Forwards rainbow effect with increasing speed
192
255
Backwards rainbow effect with increasing speed
0
15
Open
16
31
Gobo 1
32
47
Gobo 2
48
63
Gobo 3
64
9
Gobo 4
7
HQ POWER

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Aeron 250 ii

Inhaltsverzeichnis