Parts Name; Control Panel - Klarstein 10017163 Gebrauchsanleitung

Warning:
Length of exhaust pipe according to the machine features, please don't replace or lengthen it freely,
otherwise errors will be easily caused.
Note: extreme length of unfolding exhaust pipe is 1500mm, please shorten the length as much as pos-
sible and keep it level as much as possible when installing.
Front side
1. Handle

2. Control Panel

3. Screen
4. Air-outlet
5. Fan blade
6. Castor
Back Side
7. Filter frame upper
8. Exhaust Connector
9. Exhaust Pipe
10. Power Cord Location
11. Filter frame lower
12. Rubber plug
13. Plug cap
Check packing accessories, read user's manual to get how to use them. (fig.4)
1. Exhaust Pipe
2. Adapter
3. Remote control
4. Sealplate
Control Panel
1. POWER: press this key to turn on/off machine. After machine turns on, default value is cooling
mode with low fan speed.
2. MODE: after machine turns on, press this key to select cooling, dehumidifying and fan mode.
3. FAN: after machine turns on, press this key to select fan speed (high and low).
4. DOWN: under cooling mode, press this key to downward setting temperature from 16~31℃.
5. UP: under cooling mode, press this key to upward temperature from 16~31℃.
6. SLEEP: under cooling mode, press this key to turn on/off sleeping function.
7. TIMER: under power-on or standby mode, press this key to setup on/off time from 1~24.

Parts Name

11