Screen; Remote Control; Operation Methods - Klarstein 10017163 Gebrauchsanleitung

Screen

1. Cooling mode indicator
2. Dehumidifying mode indicator
3. Timer mode indicator
4. Compressor running indicator
5. Temperature display
6. Sleeping mode indicator
7. Water full indicator
8. Fan mode indicator
9. Low fan speed
10. High fan speed

Remote Control

1. Power
2. Timer
3. Down
4. Mode
5. Up
6. Fan
7. Sleep
Cooling mode
• After machine turns on, default value is cooling mode with 22℃ and low fan speed.
• Press " MODE" to select cooling mode, cooling mode indictor turns on .
• Press " UP" or " DOWN" to adjust temperature ( from 16℃ to 31℃).
• Press " FAN" to select high or low fan speed.
Fan mode
• Press " MODE" to select fan mode, fan mode indicator turns on .
• Press " FAN" to select high speed or low speed.
• Temperature and sleeping function cannot be setup.
Timer mode
• Under standby mode, press "TIMER" to setup the power-on time. Timer indicator turns on.
• Under power-on mode, press "TIMER" to setup power-off timer. Timer indicator turns on.
Dehumidifying mode
• Press "MODE" to select dehumidifying mode, dehumidifying mode indicator turns on .
• Under dehumidifying mode, sleeping function cannot be setup, and fan speed is low.
Sleeping mode
• Press key "SLEEP" enter into sleeping mode, default value of fan speed is low.
• When sleeping mode turns on , under cooling mode, the first one hour later, setting temperature
will go up 1℃, the second one hour later, setting temperature will go up another 1℃, and then keep
the same .
• Sleeping mode is invalid under dehumidifying and fan mode. Under water full, machine standby
and mode conversion, sleeping mode will be cancelled.

Operation Methods

12