Placement And Installation - Klarstein 10017163 Gebrauchsanleitung

Power supply
• Make sure no damage in plug.
• Don't use connector instead of plug.
• Insert plug into socket first, then turn on socket switch , press key "POWER" to run machine.
Please safekeep this user's manual.
Placement
• Place the machine on flat and
dry ground, and keep it far from
around things at least 50cm. (fig.1)
Installation
• Spin adapter into exhaust pipe first,
then spin the exhaust pipe into exhaust
connector (counter-clockwise) (fig.2)
• Put adapter into window sealplate, adjust
window open width in order sealplate match
window well, and the length of sealplate
is adjustable.
Installation Errors
• Free access of exhaust pipe is important, installation errors will bring bad influence
of machine. (fig.3)
• Avoid exhaust-pipe with sharp bend.
• Make sure air in exhaust pipe can run smoothly .

Placement and Installation

(fig.1)
9
(fig.3)
8
(fig.2)
10