Fitting The Sliding Runners - Bauknecht BIK5 DH8FS2 ES Gebrauchs- Und Installationsanleitung

FITTING THE SLIDING RUNNERS

Please note: The sliding runners can be already mounted
on the shelf guides: to remove them, pull outward,
releasing first the lower clip.
Remove the shelf guides.
1.
Take the protective plastic off the sliding runners .
2.
Fasten the upper clip of the runner to the shelf
guide and slide it along as far as it will go . (fig . A);
lower the other clip into position .
3.
To secure the guide, press the lower portion of the
clip firmly against the shelf guide . Make sure that the
runners can move freely .
36
4.
Repeat these steps on the other shelf guide on the
same level . The sliding runners can be fitted on any
level .
5.
Reposition the shelf guides .
6.
Rest the accessories on the sliding runners .