Connecting A Usb Device; Connecting An Ipod/Iphone - Kenwood DMX8021DABS Schnellstartanleitung

Connection/Installation
Digital Radio antenna CX-DAB1 (Optional
10
accessory)
!
Use of a CX-DAB1(optional accessory) as a
Digital Radio antenna is recommended.
When using a commercially available Digital
Radio antenna, the diameter of the SMB
connector must be Φ6.5 mm or less.
Connect to vehicle's steering remote harness.
11
Contact your KENWOOD dealer for details.
12 Accessory 7: GPS Antenna
Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may
cause a drop in positioning accuracy.
Visual Output (Yellow)
13
External I/F
14
15 USB terminal (USB Type-C®)
HDMI input (Type-D)
16
Connect a KCA-HD200 (optional accessory) to
HDMI input terminal.
W
H
D
Installation/removal of fixing bracket
When you connect the cable to HDMI terminal
and USB terminal, remove the fixture. After
connecting the cable, put the fixture again.
18
Φ 6.5 mm (maximum)
W: 11.1 mm or less
H: 7.7 mm or less
D: 21.5 mm or less
Fixture
USB cable
HDMI cable
Ñ

Connecting a USB device

Accessory 2 (1.0m)
USB terminal
USB maximum power supply current :
[1]
DC 5 V = 3.0 A
[2] Sold separately
Ñ

Connecting an iPod/iPhone

iPod/iPhone [2]
Lightning Digital AV
Adapter
[2]
KCA-HD200 (1.8 m)
Accessory 2 (1.0m)
USB terminal
HDMI terminal
USB maximum power supply current :
[1]
DC 5 V = 3.0 A
Sold separately
[2]
Optional accessory
[3]
Accessory 3
USB Type-A device
[2]
[1]
[3]
KCA-iP103 (0.8m)
[3]
Accessory 3
[1]
USB-C to Lightning Cable [2]