Plus/Minus Weighings - KERN&SOHN EOB F Serie Betriebsanleitung

Plus/minus
weighings
EOS_F-BA-e-1611
 For example for item weight check, production check etc.
switch-on the balance using ON/OFF button and wait for
zero display.
 Put the nominal weight on the weighing plate
 Use the TARE button or the TARE-touchfield for taring to
 Remove the nominal weight.
 Put the test objects subsequently on the weighing plate, the
respective deviation from the nominal weight is displayed
with the respective sign to „+" and „-" (e.g. + 0.73 g).
According to the same procedure also packages with the
same weight can be produced, referring to a nominal
weight.
 Back to weighing mode by pressing the TARE button or the
TARE-touchfield.
(Example)
zero.
21