Troubleshooting - SOUNDMASTER ICD1010AN Bedienungsanleitung

6. LANGUAGE
Change it as your preference.
7. FACTORY RESET
A factory reset resets all user settings to default values, so that time and date, network
configuration and presets are lost. However, the ICD1010 's current software version is
maintained.
8. SOFTWARE UPDATE
From time to time, software upgrades may be created with bug fixes and/or additional
features. You can either check manually or set ICD1010 to check periodically automatically
(this is the default). If newer available software is detected, you will be asked if you want to
go ahead with an update. If you agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that ICD1010 is plugged into a stable
main power connection. Disconnecting power during an upgrade may permanently damage
the unit.
9. SOFTWARE UPGRADE
Install the software via PC
10. SETUP WIZARD
Starts the setup wizard
11. INFORMATION
View the firmware version and the radio ID.
12. PRIVACY POLICY
Shows information about the privacy policy
13. BACKLIGHT
Adjust the display brightness in standby and on mode.
Error
The device does not
switch on.
Switch automatically off Due to ErP2 requirements and environmental protection, the unit
No sound.

TROUBLESHOOTING

Remedy
Check it the power adaptor is connected properly.
automatically switches to standby mode when no music is played
for more than 15 minutes.
1. Turn on the sound as it may be muted
2. Increase the volume.
16
ICD1010 / English Instruction Manual