ALPA MEGArod Bedienungsanleitung Seite 9

MODE
mm mm
mult
÷
MODE
mm mm
off
MODE
mm mm
loc
MODE
Note: It is also possible to display the tolerance limits when the instrument is operating in MIN, MAX or DELTA (TIR) mode.
If no tolerance limit has been defined by the user, the instrument will display the tolerance limit indicators
SET
x
001,000
INPUT
mm
man auto
mm
on off
Inputting a multiplication factor other than 1.000
next digit
SET
Automatic switch-off mode
MAN= de-activated, AUTO= active (after 20 min.)
SET
Keypad lock
Only the favourite key
(to unlock the keypad, press
OK
, but will not turn on the indicator lights (red - green - yellow)
SET 0... 9 MODE save PRESET
remains active
for 5 sec)
SET
EN