ALPA MEGArod Bedienungsanleitung Seite 13

EN
RE-INITIALISING THE INSTRUMENT
The initial instrument settings can be restored at any time by a prolonged press (>4 sec)
simultaneously on and until the message CLEAr is displayed. Nevertheless the retains its
SET MODE
configuration settings (units and resolution) as well as the last active reference.
PERSONALISING THE INSTRUMENT
Access to the functions of your instrument can be personalised using the free S_Dial WORK Demo or
Sylconnect software, which is available on the www.sylvac.ch website (requires you to connect your
instrument via a Proximity or Power RS / USB cable).
This program enables you to:
- De-activate or active the required functions
- Modify access to the advanced functions (direct access)