Light Intensity, Uv Index & Sunburn Time - Bresser 7802541 Bedienungsanleitung

6. Rate - Current rainfall rate (base on 10 min rain data)
Rain rate level definition:
Level 1:
Light rain
0.1~ 2.5 mm/h
TO RESET THE TOTAL RAINFALL RECORD
In normal mode, press and hold [ HISTORY ] key for 2 seconds to reset all the rainfall record.
NOTE:
To ensure to have correct data, please reset all the rainfall record when you reinstall your
wireless 7-IN-1 sensor to other location
LIGHT INTENSITY, UV INDEX & SUNBURN TIME
This section of display show the sunlight intensity, UV index and sunburn time. Press the [
SUN ] key to change the mode.
LIGHT INTENSITY MODE:
1. During light intensity mode, press and hold [ SUN ] key
for 2 seconds to enter unit setting
2. press [
] or [
Klux Kfc
3. Press [ SUN ] key to confirm and exit the setting.
UV INDEX MODE:
To show the currect UV index detected by the
outdoor sensor. Corresponding exposure level
and suggested protection indicator are also
displayed.
SUNBURN TIME MODE:
To show the recommended sunburn time
according to current UV level.
UV INDEX & SUNBURN TIME TABLE
Exposure
level
UV index 1
Sunburn time
Recommended
protection
indicator
Level 2:
Moderate
2.51 ~ 10.0 mm/h
] key change the unit in sequence:
W/m².
Low Moderate
2 3 4
N/A 45 minutes
N/A Moderate or high UV
level! Suggest to wear
sunglasses, broad
brim hat and long-
sleeved clothing.
Level 3:
Heavy rain
10.1 ~ 50.0 mm/h
Suggest
protection
indicator
High
5 7
6
30
minutes
Very high or Extreme UV level!
Suggest to wear sunglasses,
broad brim hat and long-
sleeved clothing, If you have
to stay outdoors, make sure to
seek shade.
28
Violent rain:
> 50.0 mm/h
Very high
10
8 9
15 minutes 10 minutes
Rain rate level
Level 3
Exposure level
Extreme
11 12~16