Makita DUB363ZV Betriebsanleitung Seite 9

While operating the machine, always wear
5.
non-slip and protective footwear. Non-skid,
closed-toed safety boots and shoes will reduce the
risk of injury.
Use personal protective equipment. Always
6.
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
Operation
Switch off the machine and remove the battery
1.
cartridge and make sure that all moving parts
have come to a complete stop
whenever you leave the machine.
•
before clearing blockages.
•
before checking, cleaning or working on
•
the machine.
if the machine starts to vibrate
•
abnormally.
whenever you convert the machine from
•
blower to vacuum, and vice versa.
Operate the machine only in daylight or in
2.
good artificial light.
Do not overreach and keep proper balance and
3.
footing at all times.
Always be sure of your footing on slopes.
4.
Walk, never run.
5.
Keep all cooling air inlets clear of debris.
6.
Never blow debris in the direction of
7.
bystanders.
Operate the machine in a recommended posi-
8.
tion and on a firm surface.
Do not operate the machine at high places.
9.
10. Never point the nozzle at anyone in the vicinity
when using the machine.
Never block suction inlet and/or blower outlet.
11.
Be careful not to block suction inlet or
•
blower outlet with dust or dirt when oper-
ating in dusty area.
Do not use nozzles other than the nozzles
•
provided by Makita.
Do not use the blower to inflate balls,
•
rubber boat or the similar.
12. Do not operate the machine near open window,
etc.
13. Operating the machine only at reasonable
hours is recommended - not early in the
morning or late at night when people might be
disturbed.
14. Using rakes and brooms to loosen debris
before blowing is recommended.
15. If the machine strikes any foreign objects or
should start making any unusual noise or
vibration, immediately switch off the machine
to stop it. Remove the battery cartridge from
the machine and inspect the machine for
damage before restarting and operating the
machine. If the machine is damaged, ask
Makita Authorized Service Centers for repair.
16. Do not insert fingers or other objects into
suction inlet or blower outlet.
17. Prevent unintentional starting. Ensure the
switch is in the off-position before inserting
battery cartridge, picking up or carrying the
machine. Carrying the machine with your fin-
ger on the switch or energizing the machine
that has the switch on invites accidents.
18. Never blow or vacuum dangerous materials,
such as nails, fragments of glass, or blades.
19. Do not operate the machine near flammable
materials.
20. Avoid operating the machine for a long time in
low temperature environment.
Maintenance and storage
Keep all nuts, bolts and screws tight to be sure
1.
the machine is in safe working condition.
If the parts are worn or damaged, replace them
2.
with parts provided by Makita.
Store the machine in a dry place out of the
3.
reach of children.
When you stop the machine for inspection, ser-
4.
vicing, storage, or changing accessory, switch
off the machine and make sure that all moving
parts come to a complete stop, and remove the
battery cartridge. Cool down the machine before
making any work on the machine. Maintain the
machine with care and keep it clean.
Always cool down the machine before storing.
5.
Do not expose the machine to rain. Store the
6.
machine indoors.
When you lift the machine, be sure to bend your
7.
knees and be careful not to hurt your back.
Battery tool use and care
Recharge only with the charger specified by
1.
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
Use power tools only with specifically desig-
2.
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
When battery pack is not in use, keep it away
3.
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
Under abusive conditions, liquid may be
4.
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
Do not use a battery pack or tool that is dam-
5.
aged or modified. Damaged or modified batteries
may exhibit unpredictable behaviour resulting in
fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or
6.
excessive temperature. Exposure to fire or tem-
perature above 130 °C may cause explosion.
Follow all charging instructions and do not
7.
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
9 ENGLISH