How To Manage: Error Codes - AEG BSE77228BM Benutzerinformation

The oven does not turn on or does not heat up
Possible cause
The fuse is blown.
The oven Child Lock is on.
Components
Description
The lamp is burnt out.
Power cut always stops cleaning. Repeat cleaning if it's interrupted by power failure.

12.2 How to manage: Error codes

When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description
C2 - the Food sensor is in the oven cavity dur‐
ing Pyrolytic Cleaning.
C3 - the door is not fully closed during Pyrolyt‐
ic Cleaning.
F111 - Food sensor is not correctly inserted in‐
to the socket.
F240, F439 - the touch fields on the display do
not work properly.
TROUBLESHOOTING
Remedy
Make sure the fuse is the cause of the prob‐
lem. If the problem recurs, contact a qualified
electrician.
Refer to "Menu" chapter, Submenu for: Op‐
tions.
Remedy
Replace the lamp, for details refer to "Care and
Cleaning" chapter, How to replace: Lamp.
Remedy
Take out the Food sensor.
Close the door.
Fully plug Food sensor into the socket.
Clean the surface of the display. Make sure
there is no dirt on the touch fields.
123/312