Installation - WITA Delta Plus UE 65A PWM Serie Original Einbau- Und Betriebsanleitung

Operating instrutions
WITA Delta Plus UE 65A-XX PWM | UE 80A-XX PWM

10 Installation

Fig. 1
Install the device with the power supply disconnected and with the pump motor lying horizon-
tally (the arrow on the pump housing shows the direction of flow) (Fig. 1).
When performing insulation work, ensure that the pump motor and the electronics housing are
not covered in insulation. If the installation location changes, you must rotate the motor housing
as follows:
• Unscrew the socket screw
• Rotate the motor housing
• Re-insert the socket screw and tighten
30