WITA Delta Plus UE 65A PWM Serie Original Einbau- Und Betriebsanleitung Seite 27

WITA Delta Plus UE 65A-XX PWM | UE 80A-XX PWM
Illuminated panel
red lights permanently
red flashes
yellow lights permanently
yellow flashes
Change between the modes of operation by repeatedly pressing the key.
LED lights up red = Mode 1
• Between 0 and 20% PWM signal the pump rotates at minimum speed.
• Between 20 -100% PWM signal the speed increases gradually up to the maximum value.
LED flashes red = Mode 2
• Between 0 and 20% PWM signal the pump rotates at minimum speed.
• Between 20 -100% PWM signal the speed decreases gradually
from maximum value to minimum value.
LED flashes red = Mode 3
• Between 0 and 20% PWM signal the pump is switched off.
• Between 20 -100% PWM signal the speed increases gradually
from minimum value to the maximum value.
LED flashes red = Mode 4
• Between 0 and 20% PWM signal the pump is switched off.
• Between 20 -100% PWM signal the speed decreases gradually
from maximum value to minimum value.
Without PWM signal connected, the pump rotates in Mode 1 and 2 at minimum speed.
It is switched off in Mode 3 and 4.
The individual regulation time for changes in speed is about 2 seconds.
Description
Mode 1
Mode 2
Mode 3
Mode 4
Operating instrutions
27