Storage; Troubleshooting - Philips AC2939 Benutzerhandbuch

5 Storage

1
Turn off the air purifier and unplug from the power socket�
2
Clean the air purifier, particle sensor and the surface of the filter (see the
chapter "Cleaning and maintenance")�
3
Let all parts air dry thoroughly before storing�
4
Wrap the filter in air tight plastic bags�
5
Store the air purifier, filter in a cool, dry location�
6
Always thoroughly wash hands after handling filters�

6 Troubleshooting

This chapter summarizes the most common problems you could encounter
with the appliance� If you are unable to solve the problem with the information
below, contact the Consumer Care Center in your country�
Problem
The appliance
does not work
properly�
The airflow that
comes out of
the air outlet
is significantly
weaker than
before�
EN
8
Possible solution
• The filter replacement alert has been on continuously
but you have not replaced the corresponding filter� As a
result, the appliance is now locked� In this case, replace
the filter and long press
counter�
• The surface of the filter is dirty� Clean the surface of the
filter (see the chapter "Cleaning and maintenance")�
to reset the filter lifetime