Filter Reset; Storage - Philips AC5659/10 Benutzerhandbuch

Note
• Wash your hands after changing a filter.
• This air purifier has no other user-
serviceable parts. For assistance,
contact the Consumer Care Center in
your country.

Filter reset

You can replace filters even if there is
no filter replacement code displayed on
the screen. After replacing a filter, you
need to reset the filter lifetime counter
manually.
1
Touch and
3 seconds to enter the filter reset
mode (fig.€).
» Code (A3) of the NanoProtect
filter Series 3 displays on the
screen.
2
Touch and hold
force reset the filter lifetime counter
of the NanoProtect filter Series 3
(fig.).
3
Code (C7) of the NanoProtect filter
Active Carbon displays on the
screen after the lifetime counter of
the NanoProtect filter Series 3 has
been reset (fig.‚).
4
Touch and hold
force reset the filter lifetime counter
of the NanoProtect filter Active
Carbon and exit the filter reset
mode (fig.ƒ).
14 EN
simultaneously for
for 3 seconds to
for 3 seconds to
7

Storage

1
Turn off the air purifier and unplug
from the power socket.
2
Clean the air purifier, air quality
sensor and pre-filter (see chapter
'Cleaning').
3
Let all parts air dry thoroughly
before storing.
4
Wrap the filters and pre-filters
separately in air tight plastic bags.
5
Store the air purifier, filters and pre-
filters in a cool, dry location.
6
Always thoroughly wash hands after
handling filters.