Turning On And Off; Changing The Mode Setting; Switching The Display Indicator; Using The Light On/Off Function - Philips AC2939 Benutzerhandbuch

Turning On and Off

Note:
• Put the plug of the air purifier in the power socket�
• If the purifier stays connected to the electrical outlet after turning OFF, the air purifier will
operate under the previous settings when turned ON again�
1
Touch to switch on the air purifier (fig h)�
2
The " " displays on the screen during warming up� Then the air purifier
shows the IAI/PM2�5 level after measuring the air quality (fig i)�
3
The air purifier operates in the auto mode with IAI displayed on the screen
(fig j)�
4
Touch and hold the
(fig k)�

Changing the mode setting

You can choose Auto mode, Turbo mode, Gentle mode or the Sleep mode by
touching the button�
1
Auto mode (
accordance with the ambient air quality (fig l)�
2
Turbo mode (
3
Gentle mode (
4
Sleep mode (
3 seconds, the screen lights off (fig o)�

Switching the display indicator

Note:
• The appliance display IAI level by default (fig p & fig q)�

Using the light on/off function

You can touch the light on/off button
control panel� Touch any button to wake up all lights (fig r & fig s)�
With the light sensor:
• The control panel can automatically turn on, turn off or dim according to
the ambient light�
•
The control panel will be off or dim when the ambient light is dark�
You can touch any button to wake up all lights� If no further operation, all
lights will be off or dim again to match with the ambient light�
button for 3 seconds to switch off the air purifier
): The air purifier automatically adjusts the fan speed in
): The air purifier operates on the highest speed (fig m)�
): The air purifier operates at a low speed (fig n)�
): The air purifier operates quietly at a low speed� After
manually to turn off all lights and the
EN
5