Osd Settings - Velleman CAMTVI11 Bedienungsanleitung

7.

OSD Settings

There is a small joystick in the camera cable that allows you to adjust the
settings of the camera using an on-screen display (OSD).
In the OSD menu:
 NEXT/BACK: select this option and press the middle button to go to the
next/previous page of options in the menu.
 RETURN: select this option and press the middle button to return to the
previous level in the menu.
 EXIT: select this option and press the middle button to leave the OSD
menu without saving the settings.
 SAVE ALL: select this option and press the middle button to save all
settings.
 CAMERA RESET: select this option and press the middle button to reset
the camera to the factory defaults.
The OSD menu settings are described in detail below.
Refer to the table on page 3.
7.1 Selecting the Video Signal
Hold the joystick button pressed for 5 seconds to select your video signal
(default signal: TVI).
CVBS
7.2 Automatic Exposure (AE)
Use this menu to set the common adjustments for video images.
V. 01 – 01/07/2016
All manuals and user guides at all-guides.com
CAMTVI11/CAMTVI11Z
 Press the middle button to access the menu, or to
select an option.
 Press the up and down buttons to move up and
down in the menu.
 Press the left and right buttons to modify the menu
parameters.
AHD
CVI
6
TVI
©Velleman nv