Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Use Only As Directed
•
Observe all warnings on the speaker and in this manual.
•
Please check the speaker for damage before use.
•
Carefully consider the proper location before beginning the installation
•
Observe the correct polarity when connecting these speakers, according to the instructions in this
manual.
Location
•
Speakers should be mounted close to, or slightly above ear level whenever possible.
•
Allow at least 1.5" of clearance between the wall "cut-out" and any studs or joists
•
Please refer to the specification chart for the required depth for each model.
•
Use the included template for proper "cut-out" of drywall
•
Do not install the speaker near any heat sources such as radiators, heating valves, stoves or apparatus
(including amplifiers) ,or in areas where there is a risk of explosion.
•
Do not install the speaker near transformers. EMF fields can cause unwanted noise
•
Do not install the speaker in locations that are extremely humid, exceptionally hot, cold or prone to
vibrations
Overload
•
Extreme overload of the device due to very high volume may cause damage to individual components.
Because of the possible danger, you should never leave loudspeakers under extreme overload
conditions unattended.
Volume
•
CAUTION: Continuous high volume may cause severe damage to your hearing. Please listen responsibly.
Disposal
•
The packaging is made from recyclable materials. Please be responsible & dispose of these packaging
materials in an environmentally sensitive manner.
SAFETY INSTRUCTIONS
2
Werbung
Inhaltsverzeichnis
