Function Display; Average Bicycle Speed; Maximum Bicycle Speed; Trip Meter - Batavus Yamaha 2014 Bedienungsanleitung

Function select
switch
Function
display
52

6.11 Function display

The function display can display the following functions:

• Average bicycle speed

• Maximum bicycle speed

• Trip meter

• Odometer

• Remaining assist distance
• Battery capacity (%)
• Cadence
When you push the function select switch, the display changes as
follows:
Average bicycle speed – Maximum bicycle speed – Trip meter
– Odometer – Remaining assist distance – Battery capacity (%) –
Cadence – Average bicycle speed.
You can reset the data for average bicycle speed, maximum bicycle
speed and the trip meter by pressing the function select switch for
2 seconds or longer.
6.12 Average bicycle speed
This displays the average bicycle speed (in kilometers per hour or
miles per hour) since it was last reset.
When you turn off the power, the data up to that point will remain
in the display. To reset the data for the average bicycle speed,
press the function select switch for 2 seconds or longer when the
average bicycle speed is displayed.
6.13 Maximum bicycle speed
This displays the maximum bicycle speed (in kilometers per hour
or miles per hour) since it was last reset.
When you turn off the power, the data up to that point will remain
in the display. To reset the data for the maximum bicycle speed,
press the function select switch for 2 seconds or longer when the
maximum bicycle speed is displayed.
6.14 Trip meter
This displays the total riding distance (in kilometers or miles) since
it was last reset.
When you turn off the power, the data up to that point will remain
in the display. To reset the trip meter and begin counting a new
total, press the function select switch for 2 seconds or longer when
the trip meter is displayed.
6.15 Odometer
This displays the total distance (in kilometers or miles) ridden
while the power was on. The odometer cannot be reset.