Inhaltsverzeichnis
Werbung
LOADING THE RACKS
UPPER RACK
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted: high position to place bulky
crockery in the lower basket and low position to make the most of the tip-
-up supports by creating more space upwards and avoid collision with the
items loaded into lower rack.
The upper rack is equipped with a Upper Rack
height adjuster (see figure), without pressing the
levers, lift it up by simply holding the rack sides,
as soon as the rack is stable in its upper position.
To restore to the lower position, press the levers A
at the sides of the rack and move the basket do-
wnwards.
We strongly recommend that you do not ad-
just the height of the rack when it is loaded.
NEVER raise or lower the basket on one side
only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold or
unfold to optimize the arrangement
of crockery inside the rack.
Wine glasses can be placed safely in
the foldable flaps by inserting the
stem of each glass into the corre-
sponding slots.
Depending on the model:
• to unfold the flaps there is needed
to slide it up and rotate or release
it from the snaps and pull it down.
• to fold the flaps there is needed
to rotate it and slide flaps down or pull it up and attach flaps to the
snaps.
Load delicate and light dishes:
glasses, cups, saucers, low salad
bowls.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids sho-
uld ideally be placed at the sides to avoid interferences with the spray
arm. The lower rack has tip-up supports which can be used in a vertical
position when arranging plates or in a horizontal position (lower) to
load pans and salad bowls easily.
(loading example for the lower rack)
CUTLERY BASKET
It is fitted with top grids for improved
cutlery arrangement.
It must only be positioned at the front
of the lower rack.
Knives and other utensils with sharp
edges must be placed in the
cutlery basket with the points facing
downwards or they must be
positioned horizontally in the tip-up
compartments on the upper rack.
POWER CLEAN®
Power Clean® uses the special water
jets in the rear of cavity to wash more
intensively the high dirty items. The
lower rack has a Space Zone, a special
pull-out support in the rear of the rack
that can be used to support frying
pans or baking pans in upright position, thus taking up less space.
Placing the pots/casseroles faced to the Power Clean® component please
activate the POWER CLEAN® on the panel.
How to use Power Clean®:
1. Adjust the Power Clean® area
G folding down the rear plate
holders to load pots.
2. Load pots and casseroles inclined
vertically in Power Clean® area.
Pots have to be inclined towards
the power water jets.
EN
5
Werbung
Inhaltsverzeichnis
