Replacing The Lamp; Closing The Door - Electrolux ENC8MD18S Benutzerinformation

Problem
The symbol appears and
the alarm indicator is on.
The or
symbol and the current
setting appear alternately every 5
seconds and the alarm indicator is
on.
If the advice does not lead to the desired
result, call the nearest Authorized
Service Centre.

8.2 Replacing the lamp

The appliance is equipped with a longlife LED
interior light.
Only service is allowed to replace the lighting
device. Contact your Authorised Service
Centre.
Possible cause
Communication problem.
Temperature sensor problem.
or
Solution
Contact the nearest Authorised
Service Centre. The cooling system
will continue to keep food products
cold, but temperature adjustment
will not be possible.
Contact the nearest Authorised
Service Centre. The cooling system
will continue to keep food products
cold, but temperature adjustment
will not be possible.

8.3 Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
installation instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
ENGLISH 25