Daily Use; Positioning The Door Shelves; Movable Shelves - Electrolux ENC8MD18S Benutzerinformation

3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
Temperature units
Using the Setting mode, you can change the
temperature unit displayed on the control
panel from Celsius to Fahrenheit. To change
the temperature unit:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap repeatedly until you see
. Tap the indicator showing the unit to
select between
for Fahrenheit.
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.

5. DAILY USE

5.1 Positioning the door shelves

To permit storage of food packages of
various sizes, the door shelves can be placed
at different heights.
1. Gradually pull the shelf up until it comes
free.
2. Reposition as required.
12 ENGLISH
.
and
for Celsius and
Factory settings
This function restores each setting to the
factory default settings. To restore the factory
default settings:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap repeatedly until you see
. Tap repeatedly until you see
turns into blinking
solid , which indicates that factory
settings are restored.
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.

5.2 Movable shelves

The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
.
and
.
and then into